CNC Automatic Sink Rolling Seam Welding Machine

（FNC-200K）

CNC Automatic Sink Rolling Seam Welding Machine

（FNC-200K）

Use the servo motor to drive axle X (locating mould) and axle Y (welding electrode) to operate under the preset procedure of PLC data. It could store 15 sets of welding models at most (be able to store 15 sets of welding position and welding current of product). According to the stored position of welding spot, the welding product will be located inside the mould and moves horizontally along the X direction and the moving area should be no more than 1200mm. The welding electrode will be designed to move vertically along the Y direction and the moving area should be no more than 600mm. The welding electrode moves from top to bottom within 300mm along the axle Z direction and be able to conduct 360° of rotation under the control of servo motor so it is suitable for welding different angles of products.
Suitable for welding the sink within the range of 1200mmx600mm x400mm.


Main Technical Parameter Datas:

Model

FNC-200K

Input Power

Three-phase 380V±10% 50Hz

Rated Capacity

200KVA

Rated Duty Cycle

50%

Maximum Secondary Circuit Current

31000A

Insulation Grade Of Welding Transformer

Grade F

Time Adjustment Range Of Program Segment

0～9999ms

Heat Adjustment Range

15%～99%

Power Grid Voltage Fluctuation Compensation

When the voltage fluctuates between±10%, the secondary voltage fluctuates between≤±3%

Welding Wheel Diameter

100-120mm

Welding Wheel Width

3-5mm

Welding Wheel Speed

1800-4000mm/min adjustable

X Axle Moving Range

≥1600mm

Y Axle Moving Range

≥600mm

Z Axle Moving Range

≥350mm

A Axle Moving Range

360°

Rated Air Pressure

0.8MPa

Air Consumption

1m3/h

Water Pressure

0.2Mpa

Water Temperature

10-20℃

Cooling Water Consumption

1000L/H